May 8, 2014

Toggle Clamps

Toggle clamps are used for temporary clamping that can be employed and released easily via the motion of a handle, lever, or pneumatic switch. Different applications for toggle clamps require different configurations, including vertical, push-pull, cam, latch, and hook designs. They also require different sizes and clamping pressure.

Toggle Clamps

What is Toggle Principle
Toggle action clamps operate through a linkage system of levers and pivots. The fixed length levers, connected by pivot pins supply the action and clamping force. Toggle action has an over center lock point which is a fixed stop and linkage. Once in the over center position, the clamp cannot move or unlock unless the linkage is moved. All types of toggle clamps have same action, just oriented differently.

Main three functions in Toggle Mechanism:

  1. To multiply applied load at the handle into a high clamping force to hold the work piece.
  2. To create an over – center lock to prevent the clamp from opening & releasing the work piece until opened by the operator.
  3. To rapidly open & close the clamp giving a maximum clearance in which to load & unload the work piece.

Locks & Latch for Machine Door

Types of Toggle Actions

  • Vertical Hold Down Action Clamp ( VTC Series)
  • Horizontal Hold Down Action Clamp ( H Series)
  • Straight Line Action Clamp ( HTC Series)
  • Pull Action Clamp ( PAH Series)
  • Squeeze Action Clamp ( TP Series)
  • Squeeze Action Clamp ( PAH Series)

How to select proper Toggle Clamp
The information contained in this catalog is designed to select the right clamp for your job. For most of the ordinary applications, consideration Of the following points will lead to the proper selection of clamps:

  • Size & Shape of the parts to be held
  • Uniformity of the part size
  • Holding capacity required
  • Strength & dexterity of the operator
  • Operators suitability
  • Frequency & time cycle of the operation
  • Environmental factors
  • In case of pneumatic clamps cycling time and sequence

Benefits of using Toggle Clamps

  • The clamping and release is achieved in seconds. This gives tremendous time saving per cycle in production.
  • Easy To Incorporate: No additional accurate machining, tooling, slotting etc. is needed while using these clamps in any tooling.
  • Versatility: Available in push, pull, hold-down, latch type, plier type, these clamps can handle clamping irrespective of shape and size of the work piece.
  • Durability: All vital components are hard and zinc plated giving adequate wear and corrosion resistance ensuring longer work life.
  • Low Maintenance: These clamps are virtually maintenance free. Occasionally few drops of lubricating oil is all that is needed to keep them in good working condition.
  • Cost Saving: Tooling costs are reduced as tool design and tool making becomes simpler. Reduced production cost by increasing productivity

Toggle clamps are also referred to as:
toggle latches, latches, push-pull clamps, power clamps, and pneumatic clamps.

Types of Toggle Clamps

  • Manual Clamps

Hold Down Action Toggle Clamps

Pull Action Toggle Clamps

  • H.V Series Clamps
  • Pneumatic Clamps
  • Swing Clamps
  • Fixture Elements
  • Clamping Devices

List of Model Nos.

Vertical Hold Down Action

  1. VTC ‐ 6561 A
  2. VTC ‐ 120132 A
  3. VTC ‐ 9092 ‐ HV ‐ SP
  4. VTC 317 Series
  5. VTC ‐ 317 ‐ U
  6. VTC ‐ 317 ‐ S

VTC Series Medium Duty Clamps ‐ Flanged Base

  1. VTC ‐ 1625 SF/UB
  2. VTC ‐ 2535 ‐ SF/UB/SB
  3. VTC ‐ 3670 ‐ SF/UB/SB
  4. VTC ‐ 4595 ‐ SF/UB/SB
  5. VTC ‐ 5040 ‐ SF
  6. VTC ‐ 50125 ‐ SF/UB/SB
  7. VTC ‐ 85150 ‐ SF/UB/SB
  8. VTC ‐ 10088 ‐ SF

Stainless Steel

  1. VTC ‐ 1625 ‐ UB ‐ SS
  2. VTC ‐ 2535 ‐ UB ‐ SS
  3. VTC ‐ 3670 ‐ UB ‐ SS

VTC Series Medium Duty Clamps ‐ Straight Base

  1. VTC ‐ 2535 ‐ SF/UB/SB ‐ BS
  2. VTC ‐ 8154 ‐ SB/BS
  3. VTC ‐ 3670 ‐ SF/UB/SB ‐ BS
  4. VTC ‐ 4595 ‐ SF/UB/SB ‐ BS
  5. VTC ‐ 50125 ‐ SF/UB/SB ‐ BS
  6. VTC ‐ 85150 ‐ SF/UB/SB ‐ BS

VTC Series Medium Duty Clamps ‐ Front Base

  1. VTC ‐ 6440 ‐ UB/FM
  2. VTC ‐ 7273 ‐ UB/FM
  3. VTC ‐ 8296 ‐ UB/FM

CAM Action Clamps

  1. CAM ‐ 219
  2. CAM ‐ 229

Miniature Clamps

  1. H ‐ 1330 ‐ UB
  2. H ‐ 1323 ‐ SF/UB
  3. H ‐ 2123 ‐ SF/UB

Stainless Steel

  1. H ‐ 1330 ‐ UB ‐ SS
  2. H ‐ 1323 ‐ UB ‐ SS
  3. H ‐ 2123 ‐ UB ‐ SS

H Series Medium Duty Clamps

  1. H ‐ 4835 ‐ UB/FM
  2. H ‐ 2655 ‐ SF/UB
  3. H ‐ 3665 ‐ SF/UB/SB
  4. H ‐ 45105 ‐ SF/UB/SB
  5. H ‐ 57126 ‐ SF/UB/SB

Stainless Steel

  1. H ‐ 2655 ‐ UB ‐ SS
  2. H ‐ 3665 ‐ UB ‐ SS
  3. Pull Back Action
  4. GH ‐ 80379
  5. PB ‐ 345

Stainless Steel

  1. GH ‐ 80379 ‐ SS

HTC Series Clamps

  1. HTC ‐ 1220

Stainless Steel

  1. HTC ‐ 1220 ‐ SS

HTC Series Clamps ‐ Forged Base

  1. HTC ‐ 2326
  2. HTC ‐ 3025
  3. HTC ‐ 3545
  4. HTC ‐ 5065

HTC Series Clamps ‐ Low Height

  1. HTC ‐ 1530 ‐ LH
  2. HTC ‐ 2040 ‐ LH
  3. HTC ‐ 2550 ‐ LH
  4. HTC ‐ 3075 ‐ LH
  5. HTC ‐ 35100 ‐ LH

HTC Series Clamps ‐ Flat Handle

  1. HTC ‐ 3015 FH ‐ L
  2. HTC ‐ 3015 FH ‐ R
  3. HTC ‐ 4020 FH ‐ L
  4. HTC ‐ 4020 FH ‐ R
  5. HTC ‐ 5025 FH ‐ L
  6. HTC ‐ 5025 FH ‐ R

HTC Series Clamps ‐ Package Size

  1. HTC ‐ 1825 ‐ PS
  2. HTC ‐ 2530 ‐ PS
  3. HTC ‐ 3540 ‐ PS
  4. HTC ‐ 4560 ‐ PS
  5. HTC ‐ 650 ‐ PS
  6. HTC ‐ 2530 ‐ PS/BS
  7. HTC ‐ 3540 ‐ PS/BS
  8. HTC ‐ 4560 ‐ PS/BS

HTC Series Clamps ‐ Front Mounting

  1. HTC ‐ 190 ‐ FM
  2. HTC ‐ 350 ‐ FM
  3. HTC ‐ 500 ‐ FM
  4. HTC ‐ 600 ‐ FM

PAV ‐ Series Pull Action Clamps

  1. PAV ‐ 620
  2. PAV ‐ 620 ‐ M25
  3. PAV ‐ 620 ‐ M50
  4. PAV ‐ 850
  5. PAV ‐ 850 ‐ M25
  6. PAV ‐ 850 ‐ M50
  7. PAV ‐ 1065
  8. PAV ‐ 5601

Stainless Steel

  1. PAV ‐ 620 ‐ SS
  2. PAV ‐ 620 ‐ M25 ‐ SS
  3. PAV ‐ 620 ‐ M50 ‐ SS
  4. PAV ‐ 850 ‐ SS
  5. PAV ‐ 850 ‐ M25 ‐ SS
  6. PAV ‐ 850 ‐ M50 ‐ SS

PA/PAH‐ Series Pull Action Clamps

  1. PAH ‐ 2801
  2. PA ‐ 325
  3. PA ‐ 1010
  4. PA ‐ 2056
  5. PA ‐ 3580
  6. PA ‐ 4575

Stainless Steel

  1. PA‐ 325 ‐ SS

PAH ‐ Series Pull Action Clamps

  1. PAH ‐ 1210
  2. PAH ‐ 1210 ‐ M25
  3. PAH ‐ 1515
  4. PAH ‐ 1515 ‐ M25
  5. PAH ‐ 1515 ‐ M50
  6. PAH ‐ 1725
  7. PAH ‐ 1725 ‐ M25
  8. PAH ‐ 1725 ‐ M50
  9. PAH ‐ 2445
  10. PAH ‐ 2445 ‐ M25
  11. PAH ‐ 2445 ‐ M50
  12. PAH ‐ 3062
  13. PAH ‐ 3062 ‐ M25
  14. PAH ‐ 3062 ‐ M50

Stainless Steel

  1. PAH ‐ 1210 ‐ SS
  2. PAH ‐ 1210 ‐ M25 ‐ SS
  3. PAH ‐ 1515 ‐ SS
  4. PAH ‐ 1515 ‐ M25 ‐ SS
  5. PAH ‐ 1515 ‐ M50 ‐ SS
  6. PAH ‐ 1725 ‐ SS
  7. PAH ‐ 1725 ‐ M25 ‐ SS
  8. PAH ‐ 1725 ‐ M50 ‐ SS
  9. PAH ‐ 2445 ‐ SS
  10. PAH ‐ 2445 ‐ M25 ‐ SS
  11. PAH ‐ 2445 ‐ M50 ‐ SS

Pull Action Clamps

  1. PAH ‐ 30 ‐ 502
  2. PAH ‐ 30 ‐ 570
  3. PAH ‐ 30 ‐ 588LP
  4. PAH ‐ 40 ‐ 502
  5. PAH ‐ 40 ‐ 570
  6. PAH ‐ 50 ‐ 502
  7. PAH ‐ 50 ‐ 570
  8. PAH ‐ 60 ‐ 2600
  9. PAH ‐ 70 ‐ 2600
  10. PAH ‐ 33 ‐ 1260
  11. PAH ‐ 38 ‐ 1260 ‐ TRIG
  12. PAH ‐ 33 ‐ 5880
  13. PAH ‐ 38 ‐ 5880 ‐ TRIG
  14. PAH ‐ 43 ‐ 4000
  15. PAH ‐ 44 ‐ 4000 ‐ TRIG
  16. PAH ‐ 43 ‐ 4000 ‐ 150
  17. PAH ‐ 44 ‐ 4000 ‐ 150 ‐ TRIG
  18. PAH ‐ CT ‐ 0313
  19. PAH ‐ CT ‐ 10103
  20. PAH ‐ CT ‐ 10104
  21. PAH ‐ CT ‐ 10105
  22. PAH ‐ CT ‐ 1113
  23. PAH ‐ CT ‐ 0120
  24. PAH ‐ CT ‐ 0130
  25. PAH ‐ CT ‐ 21227
  26. PAH ‐ CT ‐ 21237
  27. PAH ‐ CT ‐ 0212
  28. PAH ‐ CT ‐ 0222
  29. PAH ‐ CT ‐ 0232
  30. PAH ‐ CT ‐ 0210
  31. PAH ‐ CT ‐ 0220
  32. PAH ‐ CT ‐ 0230

Stainless Steel

  1. PAH ‐ 30 ‐ 502 ‐ SS
  2. PAH ‐ 30 ‐ 570 ‐ SS
  3. PAH ‐ 30 ‐ 588LP ‐ SS
  4. PAH ‐ 40 ‐ 502 ‐ SS
  5. PAH ‐ 40 ‐ 570‐ SS
  6. PAH ‐ 50 ‐ 502 ‐ SS
  7. PAH ‐ 50 ‐ 570 ‐ SS
  8. PAH ‐ 60 ‐ 2600 ‐ SS
  9. PAH ‐ 70 ‐ 2600 ‐ SS
  10. PAH ‐ 33 ‐ 1260 ‐ SS
  11. PAH ‐ 38 ‐ 1260 ‐ TRIG ‐ SS
  12. PAH ‐ 33 ‐ 5880 ‐ SS
  13. PAH ‐ 38 ‐ 5880 ‐ TRIG ‐ SS
  14. PAH ‐ 43 ‐ 4000 ‐ SS
  15. PAH ‐ 44 ‐ 4000 ‐ TRIG ‐ SS
  16. PAH ‐ 43 ‐ 4000 ‐ 150 ‐ SS
  17. PAH ‐ 44 ‐ 4000 ‐ 150 ‐ TRIG ‐ SS
  18. PAH ‐ CS ‐ 0313 ‐ SS
  19. PAH ‐ CS ‐ 10103 ‐ SS
  20. PAH ‐ CS ‐ 10104 ‐ SS
  21. PAH ‐ CS ‐ 10105 ‐ SS
  22. PAH ‐ CS ‐ 1113 ‐ SS
  23. PAH ‐ CS ‐ 0120 ‐ SS
  24. PAH ‐ CS ‐ 0130 ‐ SS
  25. PAH ‐ CS ‐ 21227 ‐ SS
  26. PAH ‐ CS ‐ 21237 ‐ SS
  27. PAH ‐ CS ‐ 0212 ‐ SS
  28. PAH ‐ CS ‐ 0222 ‐ SS
  29. PAH ‐ CS ‐ 0232 ‐ SS
  30. PAH ‐ CS ‐ 0210 ‐ SS
  31. PAH ‐ CS ‐ 0220 ‐ SS
  32. PAH ‐ CS ‐ 0230 ‐ SS

TP Series Toggle Pliers

  1. TP ‐ 2528
  2. TP ‐ 3245
  3. TP ‐ 4570

VG ‐ Series Pliers

  1. VG ‐ 3070
  2. VG ‐ 3060 ‐ U
  3. VG ‐ 8070 ‐ C
  4. VG ‐ 10764 ‐ C
  5. VG ‐ 150100 ‐ C
  6. VG ‐ 80200 ‐ C
  7. VG ‐ 14075 ‐ C
  8. VG ‐ 3075
  9. VG ‐ 50125
  10. VG ‐ 5090 ‐ OA
  11. VG ‐ 95100 ‐ OA

H.V. Series Toggle Clamps ‐ Swivel Base

  1. HV ‐ BII ‐ 100
  2. HV ‐ BII ‐ 200
  3. HV ‐ BII ‐ 300
  4. HV ‐ BII ‐ 500
  5. HV ‐ BII ‐ 1000

H.V. Series Toggle Clamps ‐ Base Straight

  1. HV ‐ BII ‐ 100 B.S.
  2. HV ‐ BII ‐ 200 B.S.
  3. HV ‐ BII ‐ 300 B.S.
  4. HV ‐ BII ‐ 500 B.S.
  5. HV ‐ BII ‐ 1000 B.S.

H.V. Series Toggle Clamps ‐ Addl Locking Mechanism

  1. HV ‐ BII ‐ 300 ‐ TRIG
  2. HV ‐ BII ‐ 500 ‐ TRIG
  3. HV ‐ BII ‐ 300 BS ‐ TRIG
  4. HV ‐ BII ‐ 500 BS ‐ TRIG

Heavy Duty Vertical Clamps

  1. HV ‐ 700 ‐ S
  2. HV ‐ 700 ‐ T
  3. HV ‐ 700 ‐ 1A
  4. Handle ‐ H7
  5. Grip ‐ G7
  6. Arm ‐ A7
  7. Base ‐ B7
  8. HV ‐ 1200 ‐ S
  9. HV ‐ 1200 ‐ T
  10. HV ‐ 1200 ‐ 1A
  11. Handle ‐ H12
  12. Grip ‐ G12
  13. Arm ‐ A12
  14. Base ‐ B12
  15. HV ‐ 2400 ‐ S
  16. HV ‐ 2400 ‐ T
  17. HV ‐ 2400 ‐ 1A
  18. Handle ‐ H24
  19. Grip ‐ G24
  20. Arm ‐ A24
  21. Base ‐ B24
  22. HV ‐ 700 ‐ H
  23. HV ‐ 1200 ‐ H ‐ TM ‐ TU
  24. HV ‐ 2400 ‐ H ‐ TM ‐ TU
  25. HV ‐ 700 ‐ V
  26. HV ‐ 1200 ‐ V ‐ TM ‐ TU
  27. HV ‐ 2400 ‐ V ‐ TM ‐ TU
  28. HV ‐ 700 ‐ TP
  29. HV ‐ 1200 ‐ TP
  30. HV ‐ 2400 ‐ TP

Modular Clamps

  1. HV ‐ 22 ‐ LH
  2. HV ‐ 25 ‐ LH
  3. HV ‐ 33 ‐ LH
  4. HV ‐ 44 ‐ HA
  5. HV ‐ 65 ‐ HA
  6. HV ‐ 70 ‐ HA

Vertical Hold Down Action

  1. VTC ‐ 201 ‐ U
  2. VTC ‐ 201 ‐ UB
  3. VTC ‐ 202 ‐ SF
  4. VTC ‐ 202 ‐ SFB
  5. VTC ‐ 202 ‐ U
  6. VTC ‐ 202 ‐ UB
  7. VTC ‐ 202 ‐ UL
  8. VTC ‐ 207 ‐ L
  9. VTC ‐ 207 ‐ LB
  10. VTC ‐ 207 ‐ S
  11. VTC ‐ 207 ‐ SB
  12. VTC ‐ 207 ‐ U
  13. VTC ‐ 207 ‐ UB
  14. VTC ‐ 207 ‐ UL
  15. VTC ‐ 207 ‐ ULB
  16. VTC ‐ 210 ‐ S
  17. VTC ‐ 210 ‐ SB
  18. VTC ‐ 210 ‐ U
  19. VTC ‐ 210 ‐ UB
  20. VTC ‐ 247 ‐ S
  21. VTC ‐ 247 ‐ SB
  22. VTC ‐ 247 ‐ U
  23. VTC ‐ 247 ‐ UB
  24. VTC ‐ 267 ‐ S
  25. VTC ‐ 267 ‐ SB
  26. VTC ‐ 267 ‐ U
  27. VTC ‐ 267 ‐ UB

Stainless Steel

  1. VTC ‐ 201 ‐ U ‐ SS
  2. VTC ‐ 201 ‐ UB ‐ SS
  3. VTC ‐ 202 ‐ U ‐ SS
  4. VTC ‐ 202 ‐ UB ‐ SS
  5. VTC ‐ 207 ‐ U ‐ SS
  6. VTC ‐ 207 ‐ UB ‐ SS
  7. VTC ‐ 210 ‐ U ‐ SS
  8. VTC ‐ 210 ‐ UB ‐ SS

Horizontal Hold Down Action

  1. H ‐ 205 ‐ U
  2. H ‐ 206 ‐ U
  3. H ‐ 206 ‐ UB
  4. H ‐ 206 ‐ HU
  5. H ‐ 206 ‐ HUB
  6. H ‐ 305 ‐ U
  7. H ‐ 307 ‐ U
  8. H ‐ 309 ‐ U
  9. H ‐ 215 ‐ S
  10. H ‐ 215 ‐ SB
  11. H ‐ 215 ‐ U
  12. H ‐ 215 ‐ UB
  13. H ‐ 225 ‐ U
  14. H ‐ 225 ‐ UB
  15. H ‐ 235 ‐ U
  16. H ‐ 235 ‐ UB
  17. H ‐ 213 ‐ U
  18. H ‐ 213 ‐ UB
  19. H ‐ 217 ‐ U
  20. H ‐ 217 ‐ UB
  21. H ‐ 227 ‐ U
  22. H ‐ 227 ‐ UB
  23. H ‐ 237 ‐ U
  24. H ‐ 237 ‐ UB
  25. H ‐ 245 ‐ S
  26. H ‐ 245 ‐ SB
  27. H ‐ 245 ‐ U
  28. H ‐ 245 ‐ UB

Stainless Steel

  1. H ‐ 205 ‐ U ‐ SS
  2. H ‐ 305 ‐ U ‐ SS
  3. H ‐ 307 ‐ U ‐ SS
  4. H ‐ 309 ‐ U ‐ SS
  5. H ‐ 215 ‐ U ‐ SS
  6. H ‐ 215 ‐ UB ‐ SS
  7. H ‐ 225 ‐ U ‐ SS
  8. H ‐ 225 ‐ UB ‐ SS
  9. H ‐ 213 ‐ U ‐ SS
  10. H ‐ 213 ‐ UB ‐ SS
  11. H ‐ 217 ‐ U ‐ SS
  12. H ‐ 217 ‐ UB ‐ SS
  13. H ‐ 227 ‐ U ‐ SS
  14. H ‐ 227 ‐ UB ‐ SS

Straight Line Clamps

  1. HTC ‐ 603 ‐ PS
  2. HTC ‐ 608 ‐ PS
  3. HTC ‐ 610 ‐ PS
  4. HTC ‐ 607 LH
  5. HTC ‐ 630 ‐ LH
  6. HTC ‐ 605 ‐ PS
  7. HTC ‐ 609 ‐ PS

Pull Action Clamps

  1. PAH ‐ 301
  2. PAH ‐ 311
  3. PAH ‐ 323
  4. PAH ‐ 323 ‐ M25
  5. PAH ‐ 331
  6. PAH ‐ 331 ‐ M25
  7. PAH ‐ 331 ‐ M50
  8. PAH ‐ 341
  9. PAH ‐ 341 ‐ M25
  10. PAH ‐ 341 ‐ M50
  11. PAH ‐ 375
  12. PAH ‐ 375 ‐ M50
  13. PAH ‐ 385
  14. PAH ‐ 385 ‐ M50
  15. PAH ‐ 385 ‐ L
  16. PAH ‐ 385 ‐ L ‐ M50

Stainless Steel

  1. PAH ‐ 301 ‐ SS
  2. PAH ‐ 311 ‐ SS
  3. PAH ‐ 323 ‐ SS
  4. PAH ‐ 323 ‐ M25 ‐ SS
  5. PAH ‐ 331 ‐ SS
  6. PAH ‐ 331 ‐ M25 ‐ SS
  7. PAH ‐ 331 ‐ M50 ‐ SS
  8. PAH ‐ 341 ‐ SS
  9. PAH ‐ 341 ‐ M25 ‐ SS
  10. PAH ‐ 341 ‐ M50 ‐ SS

Additional Locking Mechanism
Vertical Hold Down Action

  1. VTC ‐ 207 ‐ U ‐ TRIG
  2. VTC ‐ 210 ‐ U ‐ TRIG

Horizontal Hold Down Action

  1. H ‐ 225 ‐ U ‐ TRIG
  2. H ‐ 235 ‐ U ‐ TRIG
  3. H ‐ 305 ‐ U ‐ TRIG
  4. H ‐ 307 ‐ U ‐ TRIG
  5. H ‐ 309 ‐ U ‐ TRIG

Stainless Steel

  1. H ‐ 305 ‐ U ‐ TRIG ‐ SS
  2. H ‐ 307 ‐ U ‐ TRIG ‐ SS
  3. H ‐ 309 ‐ U ‐ TRIG ‐ SS

Straight Line Action

  1. HTC ‐ 603 ‐ TRIG
  2. HTC ‐ 608 ‐ TRIG
  3. HTC ‐ 607 ‐ TRIG
  4. HTC ‐ 630 ‐ TRIG

Pull Action Clamps

  1. PAH ‐ 331 ‐ TRIG
  2. PAH ‐ 341 ‐ TRIG
  3. PAH ‐ 5271 ‐ TRIG
  4. PAH ‐ 5442 ‐ TRIG
  5. PAH ‐ 2603 ‐ TRIG
  6. PAH ‐ 385 ‐ TRIG
  7. PA ‐ 351 ‐ TRIG

Stainless Steel

  1. PAH ‐ 331 ‐ TRIG ‐ SS
  2. PAH ‐ 341 ‐ TRIG ‐ SS
  3. PAH ‐ 5271 ‐ TRIG ‐ SS
  4. PAH ‐ 5442 ‐ TRIG ‐ SS
  5. PA ‐ 351 ‐ TRIG ‐ SS

Accessories
Rubber Tip Spindles

  1. RT ‐ 420
  2. RT‐ 525
  3. RT ‐ 645
  4. RT ‐ 865
  5. RT ‐ 1085
  6. RT ‐ 12115
  7. RT ‐ 12155
  8. RT ‐ 16170

Nylon Tip Spindles

  1. NT ‐ 645
  2. NT ‐ 865
  3. NT ‐ 1085
  4. NT ‐ 12115
  5. NT ‐ 12155
  6. NT ‐ 16170

Swivel Foot Spindles ‐ SW

  1. SW ‐ 645
  2. SW ‐ 865
  3. SW ‐ 1085
  4. SW ‐ 12115
  5. SW ‐ 12155
  6. SW ‐ 16170

Large Diameter Swivel Foot Spindles

  1. LDSW ‐ 645
  2. LDSW ‐ 865
  3. LDSW ‐ 1085
  4. LDSW ‐ 12115
  5. LDSW ‐ 12155
  6. LDSW ‐ 16170

Standard Hex Spindles ‐ SH

  1. SH ‐ 645
  2. SH ‐ 865
  3. SH ‐ 1085
  4. SH ‐ 12115
  5. SH ‐ 12155
  6. SH ‐ 16170

Plain Spindles ‐ PS

  1. PS ‐ 645
  2. PS ‐ 865
  3. PS ‐ 1085
  4. PS ‐ 12115
  5. PS ‐ 12155
  6. PS ‐ 16170

Washers

  1. M4 ‐ WSHR
  2. M5 ‐ WSHR
  3. M6 ‐ WSHR
  4. M8 ‐ WSHR
  5. M10 ‐ WSHR
  6. M12 ‐ WSHR
  7. M16 ‐ WSHR

Bolt Retainers

  1. BR ‐ 1
  2. BR ‐ 2
  3. BR ‐ 3
  4. BR ‐ 4
  5. BR ‐ 5
  6. BR ‐ 6
  7. BR ‐ 7
  8. Shimpacks
  9. NX4015 ‐ TML ‐ 1
  10. NX4015 ‐ TML ‐ 2
  11. NX4015 ‐ TML ‐ 3
  12. NX4015 ‐ TML ‐ 4
  13. NX4820 ‐ TML ‐ 1
  14. NX4820 ‐ TML ‐ 2
  15. NX4820 ‐ TML ‐ 3
  16. NX4820 ‐ TML ‐ 4
  17. NX6020 ‐ TML ‐ 1
  18. NX6020 ‐ TML ‐ 2
  19. NX6020 ‐ TML ‐ 3
  20. NX6020 ‐ TML ‐ 4
  21. NX8020 ‐ TML ‐ 1
  22. NX8020 ‐ TML ‐ 2
  23. NX8020 ‐ TML ‐ 3
  24. NX8020 ‐ TML ‐ 4

U ‐ Bolts for Pull Action Clamps

  1. M49045
  2. M411545
  3. M414045
  4. M511045
  5. M513545
  6. M516045
  7. M613055
  8. M615555
  9. M618055
  10. M814570
  11. M817070
  12. M819570
  13. M1216585
  14. M1219085
  15. M1221585
  16. M49045 ‐ SS
  17. M411545 ‐ SS
  18. M414045 ‐ SS
  19. M511045 ‐ SS
  20. M513545 ‐ SS
  21. M516045 ‐ SS
  22. M613055 ‐ SS
  23. M615555 ‐ SS
  24. M618055 ‐ SS
  25. M814570 ‐ SS
  26. M817070 ‐ SS
  27. M819570 ‐ SS
  28. M1216585 ‐ SS
  29. M1219085 ‐ SS
  30. M1221585 ‐ SS
  31. M495725
  32. M498225
  33. M58545
  34. M511045
  35. M513545
  36. M811852
  37. M814352
  38. M816852
  39. M495725 ‐ SS
  40. M498225 ‐ SS
  41. M58545 ‐ SS
  42. M511045 ‐ SS
  43. M513545 ‐ SS
  44. M811852 ‐ SS
  45. M814352 ‐ SS
  46. M816852 ‐ SS

Technopolymer Plastic Base Leveling Pads

  1. TPLP ‐ 1075 ‐ 60
  2. TPLP ‐ 10100 ‐ 60
  3. TPLP ‐ 10125 ‐ 60
  4. TPLP ‐ 1275 ‐ 60
  5. TPLP ‐ 12100 ‐ 60
  6. TPLP ‐ 12125 ‐ 60
  7. TPLP ‐ 1675 ‐ 60
  8. TPLP ‐ 16100 ‐ 60
  9. TPLP ‐ 16125 ‐ 60
  10. TPLP ‐ 1075 ‐ 80
  11. TPLP ‐ 10100 ‐ 80
  12. TPLP ‐ 10125 ‐ 80
  13. TPLP ‐ 1275 ‐ 80
  14. TPLP ‐ 12100 ‐ 80
  15. TPLP ‐ 12125 ‐ 80
  16. TPLP ‐ 1675 ‐ 80
  17. TPLP ‐ 16100 ‐ 80
  18. TPLP ‐ 16125 ‐ 80

Leveling Pads Female

  1. SLPF ‐ 624
  2. SLPF ‐ 825
  3. SLPF ‐ 1032
  4. SLPF ‐ 1240
  5. SLPF ‐ 1650
  6. SLPF ‐ 2060
  7. SLPF – 2460

Leveling Pads Male

  1. SLPM ‐ 660
  2. SLPM ‐ 880
  3. SLPM ‐ 10100
  4. SLPM ‐ 10150
  5. SLPM ‐ 12100
  6. SLPM ‐ 12150
  7. SLPM ‐ 16100
  8. SLPM ‐ 16200
  9. SLPM ‐ 20100
  10. SLPM ‐ 20200
  11. SLPM ‐ 24100
  12. SLPM ‐ 24200

Collar Nuts

  1. DCCN ‐ 812
  2. DCCN ‐ 1015
  3. DCCN ‐ 1218
  4. DCCN ‐ 1624
  5. DCCN ‐ 2030
  6. DCCN ‐ 2436

Fixture Hex Nuts

  1. FXN ‐ 690
  2. FXN ‐ 8120
  3. FXN ‐ 10150
  4. FXN ‐ 12180
  5. FXN ‐ 16240
  6. FXN ‐ 20300
  7. FXN ‐ 24360
  8. FXN ‐ 30450

Extension Fixture Hex Nuts

  1. EFXN ‐ 824
  2. EFXN ‐ 1030
  3. EFXN ‐ 1236
  4. EFXN ‐ 1648
  5. EFXN ‐ 2060
  6. EFXN ‐ 2472
  7. EFXN ‐ 3090

Plain Washers

  1. SPW ‐ 84
  2. SPW ‐ 104
  3. SPW ‐ 125
  4. SPW ‐ 166
  5. SPW ‐ 206
  6. SPW ‐ 248
  7. SPW ‐ 3010

Spherical Washers

  1. DSWCS ‐ 812
  2. DSWCS ‐ 1015
  3. DSWCS ‐ 1217
  4. DSWCS ‐ 1622
  5. DSWCS ‐ 2027
  6. DSWCS ‐ 2432

Studs For T‐Nuts

  1. DCS ‐ 632
  2. DCS ‐ 650
  3. DCS ‐ 663
  4. DCS ‐ 680
  5. DCS ‐ 840
  6. DCS ‐ 863
  7. DCS ‐ 8100
  8. DCS ‐ 8160
  9. DCS ‐ 1080
  10. DCS ‐ 10100
  11. DCS ‐ 10125
  12. DCS ‐ 10160
  13. DCS ‐ 10200
  14. DCS ‐ 1280
  15. DCS ‐ 12100
  16. DCS ‐ 12125
  17. DCS ‐ 12200
  18. DCS ‐ 16100
  19. DCS ‐ 16125
  20. DCS ‐ 16160
  21. DCS ‐ 16200
  22. DCS ‐ 16250
  23. DCS ‐ 16315
  24. DCS ‐ 16500
  25. DCS ‐ 20125
  26. DCS ‐ 20160
  27. DCS ‐ 20200
  28. DCS ‐ 20250
  29. DCS ‐ 20315
  30. DCS ‐ 20400
  31. DCS ‐ 20500
  32. DCS ‐ 24100
  33. DCS ‐ 24125
  34. DCS ‐ 24160
  35. DCS ‐ 24200
  36. DCS ‐ 24250
  37. DCS ‐ 24315
  38. DCS ‐ 24400
  39. DCS ‐ 24600

Universal Step Block

  1. SSB ‐ 5033
  2. SSB ‐ 10766
  3. SSB ‐ 210131

T‐ Nuts

  1. TNSS ‐ 108
  2. TNSS ‐ 128
  3. TNSS ‐ 1210
  4. TNSS ‐ 1410
  5. TNSS ‐ 1412
  6. TNSS ‐ 1612
  7. TNSS ‐ 1816
  8. TNSS ‐ 2016
  9. TNSS ‐ 2220
  10. TNSS ‐ 2420
  11. TNSS ‐ 2824

T‐ Bolts

  1. TBSS ‐ 850
  2. TBSS ‐ 865
  3. TBSS ‐ 880
  4. TBSS ‐ 1050
  5. TBSS ‐ 1065
  6. TBSS ‐ 1080
  7. TBSS ‐ 10100
  8. TBSS ‐ 1250
  9. TBSS ‐ 1265
  10. TBSS ‐ 1280
  11. TBSS ‐ 12100
  12. TBSS ‐ 12125
  13. TBSS ‐ 12160
  14. TBSS ‐ 12200
  15. TBSS ‐ 12250
  16. TBSS ‐ 1450
  17. TBSS ‐ 1465
  18. TBSS ‐ 1480
  19. TBSS ‐ 14100
  20. TBSS ‐ 14125
  21. TBSS ‐ 14160
  22. TBSS ‐ 14200
  23. TBSS ‐ 14250
  24. TBSS ‐ 1665
  25. TBSS ‐ 1680
  26. TBSS ‐ 16100
  27. TBSS ‐ 16125
  28. TBSS ‐ 16160
  29. TBSS ‐ 16200
  30. TBSS ‐ 16250
  31. TBSS ‐ 16315
  32. TBSS ‐ 1865
  33. TBSS ‐ 1880
  34. TBSS ‐ 18100
  35. TBSS ‐ 18125
  36. TBSS ‐ 18160
  37. TBSS ‐ 18200
  38. TBSS ‐ 18250
  39. TBSS ‐ 18315
  40. TBSS ‐ 2080
  41. TBSS ‐ 20100
  42. TBSS ‐ 20125
  43. TBSS ‐ 20160
  44. TBSS ‐ 20200
  45. TBSS ‐ 20250
  46. TBSS ‐ 20315
  47. TBSS ‐ 2280
  48. TBSS ‐ 22100
  49. TBSS ‐ 22125
  50. TBSS ‐ 22160
  51. TBSS ‐ 22200
  52. TBSS ‐ 22250
  53. TBSS ‐ 22315
  54. TBSS ‐ 24100
  55. TBSS ‐ 24125
  56. TBSS ‐ 24160
  57. TBSS ‐ 24200
  58. TBSS ‐ 24250
  59. TBSS ‐ 24315
  60. TBSS ‐ 28100
  61. TBSS ‐ 28125
  62. TBSS ‐ 28160
  63. TBSS ‐ 28200
  64. TBSS ‐ 28250
  65. TBSS ‐ 28315
  66. TBSS ‐ 28400

Strap Clamp Flat

  1. SCF ‐ 860
  2. SCF ‐ 1080
  3. SCF ‐ 12100
  4. SCF ‐ 12125
  5. SCF ‐ 16125
  6. SCF ‐ 16160
  7. SCF ‐ 20160
  8. SCF ‐ 20200
  9. SCF ‐ 24200
  10. SCF ‐ 24250

Open‐ Ended Strap Clamp

  1. UFS ‐ 880
  2. UFS ‐ 10100
  3. UFS ‐ 12125
  4. UFS ‐ 12160
  5. UFS ‐ 12200
  6. UFS ‐ 16160
  7. UFS ‐ 16200
  8. UFS ‐ 16250
  9. UFS ‐ 20200
  10. UFS ‐ 20250
  11. UFS ‐ 20315
  12. UFS ‐ 24200
  13. UFS ‐ 24250
  14. UFS ‐ 24315

Spring Plungers
SP ‐ 01 Series

  1. SP‐01.03
  2. SP‐01.04
  3. SP‐01.05
  4. SP‐01.06
  5. SP‐01.08
  6. SP‐01.10
  7. SP‐01.12
  8. SP‐01.16
  9. SP‐01.20
  10. SP‐01.24

SP ‐ 02 Series

  1. SP‐02.04
  2. SP‐02.05
  3. SP‐02.06
  4. SP‐02.08
  5. SP‐02.10
  6. SP‐02.12
  7. SP‐02.16
  8. SP‐02.20
  9. SP‐02.24

SP ‐ 03 Series

  1. SP‐03.04
  2. SP‐03.05
  3. SP‐03.06
  4. SP‐03.08
  5. SP‐03.10
  6. SP‐03.12
  7. SP‐03.16
  8. SP‐03.20
  9. SP‐03.24

SP ‐ 04 Series

  1. SP‐04.04
  2. SP‐04.05
  3. SP‐04.06
  4. SP‐04.08
  5. SP‐04.10
  6. SP‐04.12
  7. SP‐04.16
  8. SP‐04.20
  9. SP‐04.24

Pneumatic Toggle Clamps Without Cylinder

  1. AOT ‐ 2535 UB ‐ WC
  2. AOT ‐ 3586 UB/SB ‐ WC
  3. AOT ‐ 4690 UB/SB ‐ WC
  4. AOT ‐ 57124 UB/SB ‐ WC
  5. AOT ‐ 98125 UB/SB ‐ WC
  6. AOT ‐ 3565 UBFC ‐ WC
  7. AOT ‐ 3565 SBFC ‐ WC
  8. AOT ‐ 5095 UBFC ‐ WC
  9. AOT ‐ 5095 SBFC ‐ WC
  10. AOT ‐ 4085 UB/SB ‐ WC
  11. AOT ‐ 40125 UB/SB ‐ WC
  12. AOT ‐ 2530 ‐ HTC ‐ WC
  13. AOT ‐ 3231 ‐ HTC ‐ WC
  14. AOT ‐ 3550 ‐ HTC ‐ WC
  15. AOT ‐ 5560 ‐ HTC ‐ WC
  16. AOT ‐ 6750 ‐ HTC ‐ WC
  17. AOT ‐ BII ‐ 100 ‐ WC
  18. AOT ‐ BII ‐ 200 ‐ WC
  19. AOT ‐ BII ‐ 300 ‐ WC
  20. AOT ‐ BII ‐ 500 ‐ WC
  21. AOT ‐ BII ‐ 1000 ‐ WC
  22. SSC 1640 ‐ WC
  23. SSC 2550 ‐ WC
  24. SSC 4065 ‐ WC
  25. SSC 5065 ‐ WC
  26. SSC 63100 ‐ WC

Pneumatic Toggle Clamps with SMC Cylinder

  1. AOT ‐ 2535 UB
  2. AOT ‐ 3586 UB/SB
  3. AOT ‐ 4690 UB/SB
  4. AOT ‐ 57124 UB/SB
  5. AOT ‐ 98125 UB/SB
  6. AOT ‐ 3565 UBFC
  7. AOT ‐ 3565 SBFC
  8. AOT ‐ 5095 UBFC
  9. AOT ‐ 5095 SBFC
  10. AOT ‐ 4085 UB/SB
  11. AOT ‐ 40125 UB/SB
  12. AOT ‐ 2530 ‐ HTC
  13. AOT ‐ 3231 ‐ HTC
  14. AOT ‐ 3550 ‐ HTC
  15. AOT ‐ 5560 ‐ HTC
  16. AOT ‐ 6750 ‐ HTC
  17. AOT ‐ BII ‐ 100
  18. AOT ‐ BII ‐ 200
  19. AOT ‐ BII ‐ 300
  20. AOT ‐ BII ‐ 500
  21. AOT ‐ BII ‐ 1000
  22. SSC 1640
  23. SSC 2550
  24. SSC 4065
  25. SSC 5065
  26. SSC 63100

Pneumatic Toggle Clamps with FESTO Cylinder

  1. AOT ‐ 2535 UB ‐ FS
  2. AOT ‐ 3586 UB/SB ‐ FS
  3. AOT ‐ 4690 UB/SB ‐ FS
  4. AOT ‐ 57124 UB/SB ‐ FS
  5. AOT ‐ 98125 UB/SB ‐ FS
  6. AOT ‐ 3565 UBFC ‐ FS
  7. AOT ‐ 3565 SBFC ‐ FS
  8. AOT ‐ 5095 UBFC ‐ FS
  9. AOT ‐ 5095 SBFC ‐ FS
  10. AOT ‐ 4085 UB/SB ‐ FS
  11. AOT ‐ 40125 UB/SB ‐ FS
  12. AOT ‐ 2530 ‐ HTC ‐ FS
  13. AOT ‐ 3231 ‐ HTC ‐ FS
  14. AOT ‐ 3550 ‐ HTC ‐ FS
  15. AOT ‐ 5560 ‐ HTC ‐ FS
  16. AOT ‐ 6750 ‐ HTC ‐ FS
  17. AOT ‐ BII ‐ 100 ‐ FS
  18. AOT ‐ BII ‐ 200 ‐ FS
  19. AOT ‐ BII ‐ 300 ‐ FS
  20. AOT ‐ BII ‐ 500 ‐ FS
  21. AOT ‐ BII ‐ 1000 ‐ FS
  22. SSC 1640 ‐ FS
  23. SSC 2550 ‐ FS
  24. SSC 4065 ‐ FS
  25. SSC 5065 ‐ FS
  26. SSC 63100 ‐ FS